Forum Post: RE: AM2431: accuracy of the MCU_RC_OSC_12M
The internal RC oscillator is expected to oscillate in the frequency range of 11.25MHz to 13.81MHz. Regards, Paul
View ArticleForum Post: RE: TMS320F28335: TMS320F28335
Dear Forum, I was able to unlock device by switching boot mode to branch to SCI. Then, using Uniflash entered password and unlocked device. After that erased all flash sectors. The following link...
View ArticleForum Post: RE: MSP432E401Y: MSP432E401Y + SPI flash MX25R1635FZUIL0 + file...
HI, This TI reference design TIDM-TM4C129SDRAMNVM Execute from SDRAM with code storage in NVM for high performance MCU may also help. It uses the SSI interface to read the MicroSD card. The assumption...
View ArticleForum Post: RE: MSPM0L1306: Hard fault from SysTick access
The content of a pointer to SysTick->VAL is copied into a 32-bit variable 0x8AE8 = location containing the address of the 32-bit variable 0x8AD8 = location containing the address of SysTick->VAL...
View ArticleForum Post: TMS320C28341: TCPIP IP issue with Concerto M3
Part Number: TMS320C28341 Tool/software: Hi, This is a TCPIP question that should be simple. On my M3 processor, I'm running a code that accept TCP connections, as demonstrated in...
View ArticleForum Post: RE: TMS320C28341: TCPIP IP issue with Concerto M3
Sorry, two PCs - NOT to PCs
View ArticleForum Post: RE: LAUNCHXL-F280039C: Universal motor control lab
Thank you for your response. I’ve followed the instructions in UMCL US Appendix A, as well as the code comments, and set the R and L parameters for phase-to-neutral. However, I still haven’t been able...
View ArticleForum Post: RE: MSP-FET: Window 11 driver
Hi Flemming, I tested an MSP-FET430UIF using a blinking example from our Resource Explorer in CCS for an MSP430FG479 on an MSP-TS430PN80 board. My computer recognizes the device and can program it. My...
View ArticleForum Post: RE: EK-TM4C1294XL: example for usb host
Hi, Here is an unpublished USB CDC example for host mode without comprehensive validation. I hope it will give a head start and please understand that I cannot support this example. There’s a read me...
View ArticleForum Post: RE: AM263P4: Porting FreeRTOSConfig.h settings from Cortex A to R5
Thank you for the information. The decision by the company was to use non proprietary code and tools. to use as much open source code as possible to support the transition to another MCU if necessary....
View ArticleForum Post: RE: XDS110ISO-EVM: XDS110ISO-EVM
Hi, I apologize for the delay, I will have to get back to you towards the end of this week. Best Regards, Ben Collier
View ArticleForum Post: RE: TMS320F2812: Timing of internal ADC vs ADS7953
Hi, I apologize for the delay, I will have to get back to you towards the end of this week. Best Regards, Ben Collier
View ArticleForum Post: RE: TMS320F28388D: porting problem
Hi, I apologize for the delay, I will have to get back to you towards the end of this week. Best Regards, Ben Collier
View ArticleForum Post: RE: MCU-PLUS-SDK-AM263X: MCSPI CS issue/workaround for...
Hi Cody, For multi-channel mode, the chip select is control by HW only. The FORCE bit is only used in single-channel mode. We don't guarantee that your modification will work without any issue.
View ArticleForum Post: RE: MSPM0G3507-Q1: Does the mentioned micro controller have any...
I am not familiar with UL certification, the documents that I reference above are specifically for automotive functional safety. If you had a list of documents or info that is needed to UL...
View ArticleForum Post: RE: TMDSCNCD28P65X: Problem with loading FW
Hi Jozef, Was the device you are using previously flashed? What example is causing this error? Best, Ryan Ma
View ArticleForum Post: RE: LP-MSPM0G3507: LP-MSPM0G3507
So if your I2C code changed the configuration of the SWD pins, meaning that the PINCM values of those pins were changed, this error makes sense to me. What you would need to do to recover the device...
View ArticleForum Post: MSP430F5529: JTAG on this part?
Part Number: MSP430F5529 Tool/software: I am currently working with a MSP430F5529 on the TI Launchpad dev board. It uses UBS to program and it's working fine with CCS. However in the target project I...
View ArticleForum Post: RE: TMS320F28069: Serial download of firmware
Hi Sandy, I'll need a few days to look into this issue, will update you. Thanks and regards, Charles
View ArticleForum Post: RE: TMS320F28388S: Restrict Flash Segments Erased in...
Yes they should save if you click apply or apply and close. Thanks, Charles
View Article