Hi Sebastian, Yes, you need to set the P1SEL.2 = 1 and P1SEL3 bits = 0 accordingly. . According to the datasheet, P1.2, P1.3 are available as I2C pins. You don't need to change USCIBRMP, so you should be good. Make sure you are connecting to the I2C pins on the CAPT-PGMR and that you are using __CAPT_BULKI2C_INTERFACE__ in your CAPT_Userconfig.h When using the GUI, make sure you also select the BULKI2C connection option.
↧