Quantcast
Channel: Microcontrollers
Browsing all 229822 articles
Browse latest View live

Forum Post: TMDSHVMTRINSPIN Acceleration/Deceleration Asymmetry (slow to brake)?

Hi, our system drives a rotating disk with a 320V/2.5 amp motor in speed control mode using InstaSpin-Motion. There seems to be less capability to track speed when decelerating from a point of...

View Article


Forum Post: RE: SCI A UART Problem

Amruta, Please verify that your Baud Rate settings are the same in the following locations: F2807x SCIA Configuration. Device Manager COM port settings. Terminal Program COM port Settings....

View Article


Forum Post: Cannot get xdsdfu to put Debug DevPack into DFU mode

Title says it all. The command "xdsdfu -m" should put my DevPack into a mode so I can execute "xdsdfu.exe -f firmware.bin -r", but it isn't working. Notes: 1) DevPack is for the CC2650 SensorTag. 2) I...

View Article

Forum Post: RE: Different Baud rate and parity for EUSCI_A0_MODULE and...

Silly ,mistakes mate!

View Article

Forum Post: RE: Cannot get xdsdfu to put Debug DevPack into DFU mode

Oh, and one other thing .... You will note that the serial # is "firmware". I am aware of this. It was due to a typo in a line where I used "xdsdfu.exe -s firmware.bin -r" rather than "xdsdfu.exe -f...

View Article


Forum Post: RE: Failure Loading .OUT File

Morikeh, I am going to move your post to the InstaSPIN forums. They can better assist you on this issue.

View Article

Forum Post: RE: c28x FPU vs CLA

Vishal, Thank you. it works. __asm(" MSETFLAG RNDF32=1") ==> __asm(" MSETFLG RNDF32=1") ; best regards, Simen

View Article

Forum Post: RE: LV Multi Axis + PFC Kit Errors while rebuilding project

Hi Rohit, I was able to browse to this directory and import this project and build it successfully. Can you explain how you are importing your files to CCS? Thanks, Ozino

View Article


Forum Post: Availability of MSP432 for new product.

Hi I am quite happy with msp432, and i am looking forward to use it in my product. When can i buy more than 10 and when will it drop its X status? Is it recommended to make trial product with...

View Article


Forum Post: RE: CapTIvate - Is there any effect on high temperature?

Dear Chris, Thank you very much for your reply! Oh, it compensates in firmware.. it's great technology. I got it. Thank you so much. Best regards, Yuji

View Article

Forum Post: RE: MSP432 Launchpad Problems with Internal Temperature Example...

I also spent a couple of hours debugging this same example. Although Katie provided an answer to the root problem, it’s safe to assume that most Launchpad owners to not have access to a calibrated...

View Article

Forum Post: RE: F28069 PC via SCI, RX does not work ,but TX works fine

Hi Brett Larimore, I check the position 2 of SW3, it always on. But RX not work..... I think the J1 connect can work in JTAG function and UART function simultaneously??? i.e. J1 connect only choose one...

View Article

Forum Post: What is the main advantage of using eQEP module over simply using...

Hi , I wonder for reading quadrature encoder, what is the main advantage of using eQEP module over simply using external interrupt? does eQEP use separate hardware counter and timer interrupt process...

View Article


Forum Post: RE: Win 10 ICDI Drivers Released

Hello, I'm running the TivaWare C-series usb_dev_cserial example for the ek-tm4c1294xl board and I'm still not able to get Windows 10 to recognize the board as a USB COM device. Under device manager...

View Article

Forum Post: RE: TMDSHVMTRINSPIN Acceleration/Deceleration Asymmetry (slow to...

Bill, Is it possible that your motor isn't able to reach the commanded speed? I've seen similar behavior when the motor can't reach the commanded speed and so it won't start decelerating until the ramp...

View Article


Forum Post: RM46 USB Host Mass storage drivers

Are there any drivers provided for USB Host Mass storage by TI for Hercules RM46?

View Article

Forum Post: RE: RM46 USB Host Mass storage drivers

Not by TI; but the host is a standard OHCI controller. There are OS/middleware vendors that support this controller.

View Article


Forum Post: RE: Why are there 3 ADC0 event Mux trigger sources possible for 3...

The EV drive controllers I was involved with over 30 years ago had measured efficiencies well over 90%. We had to resort to calorimetric techniques to measure it. Depending on construction and quality...

View Article

Forum Post: RE: SMP432 Port Mapping - Side effects, Practicality?

G'Day Venu, Thanks for your feedback. For points 4&5, as you suggest, I'll take the source for the PMAP_configurePorts() function and rewrite it according to my needs. It's a bit of a shame that...

View Article

Forum Post: 3137 PGE SPI3 Mode Issue with DS3234N

Hello All, I am using rev. D silicon. I have peripherals on the SPI1 and SPI5 interfaces in which I don't have a SPI mode problem/issue. The DS3234N RTC says it is compatible with Modes 1 and 3. I...

View Article
Browsing all 229822 articles
Browse latest View live


Latest Images

<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>