Forum Post: RE: TMS320F28388D: Debugging Hwi_unPluggedInterrupt being called...
That doesn't seem right as an interrupt number, but it might be the address in the vector table? 0xD26 is the address of the illegal instruction (ITRAP) interrupt. So it seems likely that the CPU...
View ArticleForum Post: RE: LP-AM243: EnDat: Channel2 not working on PRU Slice0 with...
Hi Achala, this works! Thank you for the quick investigation! Regards, Stefan
View ArticleForum Post: TMS320F2812: What is the power up sequence for TMS320F2812ZHHA?
Part Number: TMS320F2812 Tool/software: I'm revamping an old design, well ancient actually. It's a TMS320F2812ZHHA. According to this app note PDF from 2008:...
View ArticleForum Post: RE: TMS320F2809: Change boot mode pins
Hello Wayne, No, F2809 devices cannot configure zero-pin boot. Please refer to this user's guide for bootloading options on F280x devices: https://www.ti.com/lit/ug/spru722c/spru722c.pdf Best, Matt
View ArticleForum Post: RE: TM4C123AE6PM: PWM output not going to zero.
It was on the PWMGenConfigure(), not the PWMOutputUpdateMode(), I did find that I was using an incorrect parameter on the PWMPulseWidthSet(), I was using PWM_GEN_1 instead of PWM_OUT_2. Before...
View ArticleForum Post: RE: MCU-PLUS-SDK-AM273X: Can't get correct digital output from...
Hi Lin, According to the datasheet, the AM273x MIBSPI can support up to 25Mhz. Best regards, Ming
View ArticleForum Post: TMS320F280037-Q1: ASIL Level for cores
Part Number: TMS320F280037-Q1 Tool/software: This Part number has main core and secondary CLA core. Are both cores ASIL-B?
View ArticleForum Post: RE: EK-TM4C1294XL: Willing to integrate the TcpEcho example...
Hello, No, I did not start with the TcpEcho example as the base. I continued working on my independent project and manually added the necessary files from the TcpEcho example namely, tcpEcho.c ,...
View ArticleForum Post: RE: SAFETI_CQKIT: TQP and TQR document templates are almost...
Sorry about that! I changed EXT_EP-12814 . Thanks and regards, -George
View ArticleForum Post: RE: TMS320F280037-Q1: ASIL Level for cores
Both cores can meet the required LFM and SPFM metrics for ASIL-B. The safety manual for the device describes the safety mechanisms need to achieve the ASIL-B targets when using the C28x and CLA cores.
View ArticleForum Post: RE: TMS570LS20216-EP: Evaluation kit for TMS570LS20216-EP:
S5LS20216ASGWTMEP is still available for order, my supplier told me
View ArticleForum Post: RE: EK-TM4C1294XL: Willing to integrate the TcpEcho example...
Hi Siddhi, Thanks for sharing the solution and I'm sure it will benefit many in the future.
View ArticleForum Post: MSPM0G3506: 2-Wire SWD Debug Probe
Part Number: MSPM0G3506 Other Parts Discussed in Thread: TMDSEMU110-U , Tool/software: Hello TI team, 1) We are using MSPM0G3506 microcontroller in our new product line (about 10 devices). At present,...
View ArticleForum Post: RE: F29H850TU: NMI interrupt hit when Sysctl_delay function is...
Hi, Can you list out the steps followed to see this error ? [quote userid="458998"...
View ArticleForum Post: RE: TMS320F28386S: CM CPUTIMER delays issue
Hi Oleg, Apologies for the delay. We have gone through the issue and have filed a JIRA to track this and get it updated in the next C2000Ware SDK release. Please replace the file at the location -...
View ArticleForum Post: RE: F29H85X-SOM-EVM: DACB output using EVM
Hi, Are you working with something like this? If so, DAC can be brought out on the following pins: The above table is in the HSEC User's Guide: https://www.ti.com/lit/pdf/SPAU023 Best Regards, Ben Collier
View ArticleForum Post: RE: F29H85X-SOM-EVM: DACB output using EVM
Yes i am working on the above set up. The EVM User Guide does not match the Schematics of each individual board. On the HSEC connector Schematic, J1.117 is connected to GPIO 161 while the DAC-B output...
View ArticleForum Post: RE: AM2634-Q1: Using J-Link segger debugger with CCS Ide and...
Hello, [quote userid="500225"...
View ArticleForum Post: RE: TMS320F28388D: Debugging Hwi_unPluggedInterrupt being called...
Hi Whitney, Thanks for pointing me towards the ITRAP interrupt. I captured some more data for you. This picture below has a lot of data. To summarize, it shows my current breakpoint right after we set...
View ArticleForum Post: RE: SYSCONFIG: Notifications
This is a bit out my area of expertise since this more of an issue with the TI webpage issue and not an actual sysconfig issue. I will need to find the right people to escalate this to.
View Article