Part Number: MSP430F6779A I have two power suplies for my board, external 3.2V and local (battery connected to AUXVCC1 through switch). Core clock is 20MHz. Program starts when I apply external power to DVCC, and I see initial screen on LCD, VCORE=1.9V. When I power board from AUXVCC1 (external 3.2V is not present) I see 3.2V at VDSYS (pin 23) and 1.4V at VCORE (pin 26). Voltage at DVCC and AVCC is 0.4V, and LCD signals COMxx and Sxx are low. What configuration should be done for startup from AUXVCC1 and then full operation?
↧