Part Number: TMDSPREX28335 Tool/software: Code Composer Studio Hi' I have been trying to dump a sample program on to my TMDSPREX28335 device but it ccs V7 is showing the following error. error connecting to the target: (Error -151 @ 0x0) One of the FTDI driver functions used during the connect returned bad status or an error. The cause may be one or more of: no XDS100 is plugged in, invalid XDS100 serial number, blank XDS100 EEPROM, missing FTDI drivers, faulty USB cable. Use the xds100serial command-line utility in the 'common/uscif' folder to verify the XDS100 can be located. (Emulation package 6.0.576.0) Also when I checked the device manager following screen shows that the xds100 driver is having an ror. To rule out any possibility of error due to malfunctioning of the controller I tried to dump a sample program on it from a different pc, which worked fine and also there were no errors with the drivers in that PC.
↧