Hello Zhang, Thanks for your patience. The current consumption for different condition is given in section "6.5.1 System Current Consumption VREG Enabled". As you can see, the minimum current value for a heavily loaded application is 0.16 A. Each peripheral has an individual clock-enable bit (PCLKCRx). Reduced current consumption may be achieved by turning off the clock to any peripheral that is not used in a given application. The current reduction by disabling each peripheral is given in section "6.5.5.1 Typical Current Reduction per Disabled Peripheral". I will test an EVM and let you know how much is current consumption on my side. Regards, Hadi
↧