Hello Yamada-san, [quote userid="568430" url="~/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1453152/tmdsemu110-u-regarding-the-specifications-of-the-converter-adapter-that-comes-with-it/5575758#5575758"] I thought that the configuration was to connect the "XDS110 Probe" and "CTI-20 to Cortex-M 10-pin adaptor" with a cable and then fit the "CTI-20 to Cortex-M 10-pin adaptor" to the connector on the target board. [/quote] This sounds correct to me. Apologies but I can only advise on how I connect the debugger in my situation. I use ribbon cable plugged into the TMDSEMU110-U then I attach the CTI-20 to TI 14-pin adaptor. This is then plugged into the TMDSHSECDOCK. I don't use the other adaptors: - CTI-20 to Cortex-M 20-pin adaptor - CTI-20 to Cortex-M 10-pin adaptor So I guess this is not very helpful.
↧