Hi Dylan, thanks for your answers! [quote userid="489120" url="~/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1434737/mspm0g3507-trying-to-flash-program-with-deactivated-bsl/5536319#5536319"]1) Yes the same project should continue running on a device when you start a projectless debug - so if you had a blinking LED, it should continue to blink once you press play in the projectless debug[/quote] :) that's at least one thing that works, as is to be expected [quote userid="489120" url="~/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1434737/mspm0g3507-trying-to-flash-program-with-deactivated-bsl/5536319#5536319"]2) If the two files are identical, I guess that means somehow you are placing the newly generated output file there and using that. This is fine but you may want to double check that the output file is correctly changing each time you rebuild - you can compare the output file in your CCS project debug tab to the one that you can see is being flashed ton your device.[/quote] But why is this file placed somewhere else? Is there any place where I can see or change the directories or stuff like that? Please explain to me, how I can compare the .out-files by using the CCS project debug tab.. i guess you mean this debug tab: [quote userid="489120" url="~/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1434737/mspm0g3507-trying-to-flash-program-with-deactivated-bsl/5536319#5536319"]3) The error you get when you attempt to start a project-less debug indicates that your target device is not connected - please ensure that you have connected your target device to your pc using the debugger when you attempt this. I see you mention you can successfully flash the device without changing the configuration, this is also very strange.[/quote] As I can successfully flash without changing anything I guess that my target device is connected properly.. yes.. strange.. [quote userid="489120" url="~/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1434737/mspm0g3507-trying-to-flash-program-with-deactivated-bsl/5536319#5536319"]4) To check which file is being flashed to the device, you can watch the CDT build console (which does disappear after the build is complete but you can see the .out file name appear in the log), or you can hit the dropdown arrow next to the flash button in CCS, and choose the ,out file to load to your device to make sure you are loading the one you intend.[/quote] Do you mean this window by CDT build console? I do not know any flash button in CCS Theia.. are you talking about the "old" eclipse ccs 12? or are you talking about Run-load-load program in ccs theia?
↧