Forum Post: TMS320F28379D: CLI uniflash package 8.8.1 does not recognize FlashEraseSelection setting

Part Number: TMS320F28379D Other Parts Discussed in Thread: UNIFLASH Tool/software: Hi, DSLite from UniFlash 8.8.1 does not support FlashEraseSelection setting as previous version (from 8.2.0) did. log from DSLite running: Executing: /home/pi/uniflash_linux/ccs_base/DebugServer/bin/DSLite flash -c /home/pi/uniflash/f28379d.ccxml -l /home/pi/uniflash/generated.ufsettings -s VerifyAfterProgramLoad="No verification" -e -f -v "/mnt/programator/Bootloader_cpu01-part2.hex" DSLite version 12.8.0.3522 Configuring Debugger (may take a few minutes on first launch)... Initializing Register Database... Initializing: IcePick_C_0 Executing Startup Scripts: IcePick_C_0 Initializing: C28xx_CPU1 Executing Startup Scripts: C28xx_CPU1 Initializing: CPU1_CLA1 Executing Startup Scripts: CPU1_CLA1 Initializing: C28xx_CPU2 Executing Startup Scripts: C28xx_CPU2 Initializing: CPU2_CLA1 Executing Startup Scripts: CPU2_CLA1 Connecting... C28xx_CPU1: GEL Output: Memory Map Initialization Complete GEL Expression: OnTargetConnect() info: C28xx_CPU1: If erase/program (E/P) operation is being done on one core, the other core should not execute from shared-RAM (SR) as they are used for the E/P code. Also, CPU1 will be halted to determine SR ownership for the CPU which will run the Flash Plugin code, after which CPU1 will be set to run its application. User code execution from SR could commence after both flash banks are programmed. Failed: Unknown Property: FlashEraseSelection generated.settings file: {"Texas Instruments XDS110 USB Debug Probe/C28xx_CPU1":{"FlashEraseSelection":"Necessary Sectors Only (for Program Load)"},"Texas Instruments XDS110 USB Debug Probe/C28xx_CPU2":{"FlashEraseSelection":"Necessary Sectors Only (for Program Load)"}} f28379d.ccxml: It is very critical, because it does not allow programming memories in parts (flash, otp) because it erases all sectors. I installed uniflash 8.8.1 on linux (ubuntu 24.04). I selected the options and jtag emulator type and generated package with command line tools. Unfortunately DSLite is not working properly. Regards, Piotr Romaniuk