Part Number: LAUNCHXL-F280039C Other Parts Discussed in Thread: C2000WARE , Tool/software: Trying to run an led exambple(gpio_ex2_toggle) from C2000Ware. Working with LAUNCHXL-F280039C. XDS debugger is not working. Thn google took me to this link https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/468712/connect-to-the-xds110-failed Went to this pdf in uscif/xds110 folder XDS110SupportReadMe.pdf ran the following 2 commands A) xdsdfu -m output on command line: PS C:\ti\ccs1280\ccs\ccs_base\common\uscif\xds110> .\xdsdfu -m USB Device Firmware Upgrade Utility Copyright (c) 2008-2019 Texas Instruments Incorporated. All rights reserved. Scanning USB buses for supported XDS110 devices... >>> VID: 0x0451 PID: 0xbef3 Device Name: XDS110 Embed with CMSIS-DAP Version: 3.0.0.19 Manufacturer: Texas Instruments Serial Num: CL391078 Mode: Runtime Configuration: Standard Switching device into DFU mode. B) xdsdfu -f firmware.bin -r Switching device into DFU mode. PS C:\ti\ccs1280\ccs\ccs_base\common\uscif\xds110> .\xdsdfu -f firmware_3.0.0.31.bin -r USB Device Firmware Upgrade Utility Copyright (c) 2008-2019 Texas Instruments Incorporated. All rights reserved. Scanning USB buses for supported XDS110 devices... The requested device was not found on the bus. PS C:\ti\ccs1280\ccs\ccs_base\common\uscif\xds110> XDS is not updating. Not able to debug. please help
↧