Thanks Gautam But I have tried the xds100 trouble shooting. The emulator connects with the target first time, if you disconnect it and retry to connect it again its pops up the error message Error connecting to the target: (Error -1155 @ 0x0) Device may be operating in low-power mode. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board, and/or try more reliable JTAG settings (e.g. lower TCLK). (Emulation package 5.1.232.0) To reconnect it I have to power cycle the board If anyone out there has an idea of what can i do, I'd appreciate it. Thanks in advance
↧