Part Number: TMS320F28379D Hi, I recently ordered two new LAUNCHXL-F28379D Launchpads and I am not able to program any of these launchpads. The same code when I load to one of the old launchpads (same part number), it flashes without any issues. I get an error saying verification failed, the code at location 0x080076 does not match with the image. I tried changing the address of the memory to a different one, but that did not help. Below is the memory that we are using. M1 : origin = 0x080002, length = 0x0020 M2 : origin = 0x080022, length = 0x0052 M3 : origin = 0x080074, length = 0x0002 M4 : origin = 0x080076, length = 0x0100 M5 : origin = 0x080176, length = 0x1000 M6 : origin = 0x081176, length = 0x0080 I also tried to just erase flash without loading program using the CCS option, but it shows the error saying "the controller is either not connected or this operation is not allowed". I also checked the boot switches, they all match with the working board. So this should not be the problem. We are worried that we might have received faulty boards. Could you please put some light on this problem? We ordered two boards and both of them have this problem. Thank you. Gobind Singh
↧